tse2032-water-bath-integrity-tester.html

TSE2032 Water Bath Integrity Tester

Be the first to review this product

Availability: Out of stock

$8,000

Description

The TSE2032 locates gas-leaks in a package by submerging it in water and then applying a vacuum. A stream of bubbles emanates from any leakage point. An operator places the package on the water surface and closes the lid. A grid integrated in the lid pushes the sample below the surface. The air-supply lever then turns on the vacuum, and some slight pressure on the lid initiates the test. Once the leak has been identified, or the package passed, turning off the air-supply lever rapidly removes the vacuum and the lid pops-open.



  • Made from transparent Acrylic

  • Simple test initiation

  • Observe vacuum applied on a digital vacuum gauge

  • Vary the vacuum generated with regulator knob, and hence the force applied to the package

  • OH&S - Lift-assisted Lid reduces operator fatigue

  • O-ring recessed into Lid to reduce wear-and-tear

  • OH&S - Drain valve minimizes lifting while full of water

  • Screw-reinforced construction for years of trouble-free use




TSE2032_Underwater Leak Testing

More Views

  • TSE2032_Underwater Leak Testing
  • TSE2032_Locate Leak

Features

The TSE2032 locates gas-leaks in a package by submerging it in water and then applying a vacuum. A stream of bubbles emanates from any leakage point. An operator places the package on the water surface and closes the lid. A grid integrated in the lid pushes the sample below the surface. The air-supply lever then turns on the vacuum, and some slight pressure on the lid initiates the test. Once the leak has been identified, or the package passed, turning off the air-supply lever rapidly removes the vacuum and the lid pops-open.

  • Made from transparent Acrylic
  • Simple test initiation
  • Observe vacuum applied on a digital vacuum gauge
  • Vary the vacuum generated with regulator knob, and hence the force applied to the package
  • OH&S - Lift-assisted Lid reduces operator fatigue
  • O-ring recessed into Lid to reduce wear-and-tear
  • OH&S - Drain valve minimizes lifting while full of water
  • Screw-reinforced construction for years of trouble-free use

Technical Specification

Advantages Shows location of leak in package
Purpose and Application Leak test packages and identify location of leaks
Best Sensitivity No
Locate Leak Yes
Package Type Submersible
Force on Package 0-80 KPa
Package Size (Max.) 360x300x25 mm (thicker packs reduce max height/width), 460x300x200 mm
Standards will add soon
Programmable Test Methods No
Electronic Testing Record No
Air Consumption 25-110 L/m intermittent
Electrical Connection None
Operating Temperature Up to 70℃

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Contact Us

Unit14,44 Garden Blvd
Dingley Vic 3172
P:03 9540 5100
F:03 9551 5541
E: sealtick@bestech.com.au